What are the classification of wear resistant steel ball?
Release time:
2024-03-12 09:26
Source:
Steel balls are divided into three types: forged steel balls, cast steel balls, and hot-rolled steel balls.
Forged steel ball: the use of round steel cutting section with air hammer forging, forging steel ball wear resistance and the use of round steel material and impurities or round steel quality has a great relationship.
Forged steel ball main material: 45# steel, and 50mn and 60mn or 65mn, the current wear resistance and high chromium ball comparable to 75mncr material. Forged steel ball advantages: broken rate of less than 1%, good wear resistance, cheap, cost-effective.
In the cast steel ball, chromium alloy is the main component of the cast steel ball. It has poor oxidation resistance and resistance to high sulfur, diesel fuel and seawater corrosion, and its strength density is lower than that of the forged steel ball. The crushing rate is much higher than that of other process steel balls. According to the level of chromium content, wear ball can be divided into the following:
1. Chromium content 1%-3%, hardness HRC ≥ 45. This standard wear-resistant steel ball is called low chromium alloy ball, low chromium ball is produced by medium frequency electric furnace melting, metal mold or sand casting. Its performance is suitable for some metallurgical mines, slag and other industries where the grinding accuracy is not high and the wear consumption is not large.
2. Chromium content 4%-6%, hardness HRC ≥ 47. This standard is called multi-alloy ball, than low chromium steel ball strength, wear resistance slightly higher.
3. Medium chromium alloy cast balls with chromium content of 7%-10% and hardness HRC ≥ 50 have higher performance than multi-element alloy steel balls.
4, chromium content ≥ 10%-14%, hardness HRC ≥ 58, high chromium alloy cast ball, is a kind of wear-resistant ball with high utilization rate and good wear resistance in cement industry, and has a wide range of applications. However, due to good price and high performance, the market is gradually declining due to low cost performance being replaced by forged products.
5 chromium content of more than 14%, hardness HRC = 58. This is a special high chromium steel ball, suitable for grinding more meticulous, large loss of the industry, of course, its price is also quite high, cost-effective than high chromium ball slightly lower.
Previous Page
Next Page
Related News
Auto parts performance testing
There are seven factors that affect the sealing of the cylinder, mainly including cylinder wear, piston ring damage, piston wear, valve seat damage, valve guide wear, cylinder gasket damage, valve clearance and other problems.
Development History of Ductile Iron
According to modern archaeological research, a large number of cast iron-related relics and relics have been found at the back end bay cast iron site in Xinzheng Zheng Han's old city. The back end bay cast iron site is located in the southwest of Dongcheng District in Xinzheng Zheng Han's old city, covering an area of nearly 100000 square meters. The site is an official handicraft workshop for casting tools and farm tools in the capital of South Korea in the middle and late Warring States period. Decarbonization kiln was first discovered at the cast iron site in Tuiouwan, Henan Province, advancing the history of ductile iron in China by at least 200 years. It is at least 2000 years earlier than the West.
Building steel pipe scaffold fastener
Construction steel pipe scaffold fastener is an indispensable and important accessory on the construction site, which is used to connect and fix the steel pipe scaffold. Its precise length ensures the safety and stability of the project. Generally made of high-quality steel, with good compression and impact resistance. Fastener surface is smooth, galvanized anti-corrosion and anti-rust, prolong service life. Various specifications, suitable for steel pipes of different diameters, convenient installation, convenient disassembly, recyclable use, and effective cost saving. In the construction site, play a key role in ensuring the smooth progress of the project. Therefore, the selection of high-quality scaffolding fasteners is essential to ensure building safety.
Basic characteristics of gray iron castings
Clay content and silt content. High clay content of sand, with the specific pressure rise strength also increased, usually effective bentonite control in 7% to 10%. The sum of effective clay and dead clay in the molding sand is equivalent to the silt content, which is generally controlled at 12% ~ 16%. The mud content is too high or too low will affect the performance indicators of the sand.
Now it has 2 excellent automatic casting production lines of Denmark Disha, with an annual production capacity of 50000 tons of various castings. The company's construction fasteners,
Telephone
/ Tel
Mailbox
Address
/ Add
No.14, Jinzhong Road, Lishan Industrial Park, Tonghai County, Yuxi City, Yunnan Province